Home › TRANSMISSION ยท A340E AUTOMATIC TRANSMISSION › SUN GEAR AND ONE-WAY CLUTCH

SUN GEAR AND ONE-WAY CLUTCH > INSPECTION

for Preparation Click here



1. INSPECT ONE WAY CLUTCH ASSEMBLY


    AT08440E02
  1. Hold the planetary sun gear, and turn the 1 way clutch assembly Check that the 1 way clutch assembly hub can be freely clockwise and locked counterclockwise.



2. INSPECT PLANETARY SUN GEAR SUB-ASSEMBLY


    AT08337
  1. Using a dial indicator, measure the inside diameter of the planetary sun gear bushings.

    Maximum inside diameter:
    27.08 mm (1.0661 in.)

    If the inside diameter is greater than the maximum, replace the planetary sun gear.



3. INSPECT ONE WAY CLUTCH ASSEMBLY


    AT08440E02
  1. Hold the planetary sun gear, and turn the 1 way clutch assembly. Check that the 1 way clutch assembly hub can be turned freely clockwise and locked counterclockwise.