Home › SUSPENSION & AXLE › SUSPENSION › REAR LEAF SPRING

REAR LEAF SPRING > DISASSEMBLY

for Preparation Click here



1. REMOVE LEAF SPRING DYNAMIC DAMPER (FOR VAN WITH DYNAMIC DAMPER)


    C102265
  1. Remove the bolt and leaf spring dynamic damper.



2. REMOVE REAR SPRING CLIP BOLT CASE (FOR VAN WITHOUT DYNAMIC DAMPER)


    C112179E01
  1. Remove the bolt and rear spring clip bolt case.



3. REMOVE LEAF SPRING DYNAMIC DAMPER ASSEMBLY (FOR COMMUTER WITH DYNAMIC DAMPER)


    C112180
  1. Remove the 2 nuts and leaf spring dynamic damper assembly.



4. REMOVE REAR LEAF SPRING DYNAMIC DAMPER BRACKET (FOR COMMUTER WITHOUT DYNAMIC DAMPER)


    C113937
  1. Remove the 2 nuts and rear leaf spring dynamic damper bracket.



5. DISASSEMBLY REAR LEAF SPRING ASSEMBLY


    C103909
  1. Secure the rear leaf spring assembly in a vise using aluminum plates.

  1. Use a hammer or brass bar to pry open the spring clip of the rear leaf spring assembly.

    NOTICE:
    Do not damage the leaf spring.



    C062611
  1. Secure the rear leaf spring assembly in a vise using aluminum plates.

  1. Hold the center bolt with pliers and remove the nut, leaf spring, and spacer.



6. REMOVE REAR SPRING SILENCER


    C102266
  1. Remove the 2 nuts and 2 rear spring silencers.



7. REMOVE REAR SPRING SILENCER NO.1


8. REMOVE REAR SPRING LEAF BUSHING


    C102805E01
  1. Put matchmarks on the bushing on the front side of the vehicle.

    1. Align the leaf spring with the openings and put matchmarks.

  1. Use the SST and press, remove the bushings on both sides of the vehicle.

    SST
    09223-00010  
    09632-36010  

    NOTICE:
    Do not erase the matchmark on the leaf spring when removing the bushing on the front side of the vehicle.