Home › SUSPENSION & AXLE › SUSPENSION › REAR LEAF SPRING

REAR LEAF SPRING > REASSEMBLY

for Preparation Click here



1. INSTALL REAR SPRING LEAF BUSHING


    C102806E01
  1. Install a new bushing to the leaf spring.

    1. Install the bushing, aligning with the matchmarks so that the openings are facing as shown in the illustration.

      NOTICE:
      Be sure to install each bushing to the correct positions.

  1. Use the SST and press, press both bushings into the leaf spring.

    SST
    09223-00010  
    09632-36010  

    NOTICE:
    Align the SST, which presses the bushing, to the outer casing of the bushing.



2. INSTALL REAR SPRING SILENCER


    C102266
  1. Install the 2 rear spring silencers with the 2 nuts.

    Torque:
    38 N*m{ 388 kgf*cm , 28 ft.*lbf }



3. INSTALL REAR SPRING SILENCER NO.1


4. REASSEMBLY REAR LEAF SPRING ASSEMBLY
  1. Install the spacer on the leaf spring.

  1. Secure the leaf spring in a vise using aluminum plates. Temporarily install the center bolt and nut.



    C103910
  1. Use a vise with aluminum plates to cramp the spring clip.



    C062611
  1. Hold the center bolt with pliers and tighten the nut.

    Torque:
    49 N*m{ 500 kgf*cm , 36 ft.*lbf }



5. INSTALL LEAF SPRING DYNAMIC DAMPER (FOR VAN WITH DYNAMIC DAMPER)


    C102265
  1. Install the leaf spring dynamic damper with the bolt as shown in the illustration.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }



6. INSTALL REAR SPRING CLIP BOLT CASE (FOR VAN WITHOUT DYNAMIC DAMPER)


    C112179E01
  1. Install the leaf spring clip bolt case with the bolt as shown in the illustration.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }



7. INSTALL LEAF SPRING DYNAMIC DAMPER ASSEMBLY (FOR COMMUTER WITH DYNAMIC DAMPER)


    C112180
  1. Install the leaf spring dynamic damper assembly with the 2 nuts.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }



8. INSTALL REAR LEAF SPRING DYNAMIC DAMPER BRACKET (FOR COMMUTER WITHOUT DYNAMIC DAMPER)


    C113937
  1. Install the rear leaf spring dynamic damper bracket with the 2 nuts.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }