Home › TRANSMISSION ยท G55 MANUAL TRANSMISSION › INPUT SHAFT

INPUT SHAFT > DISASSEMBLY

for Preparation Click here



1. REMOVE SYNCHRONIZER RING NO.2


    C067214
  1. Remove the synchronizer ring No.2.



2. REMOVE INPUT SHAFT BEARING


    C086536
  1. Remove the 13 input shaft bearings from the input shaft assembly.



3. REMOVE INPUT SHAFT FRONT BEARING


    C086532
  1. Using a snap ring expander, remove the snap ring.



    C086533
  1. Using SST and a press, remove the input shaft shim from the input shaft.

    SST
    09527-10011