Home › BODY ELECTRICAL › LIGHTING › AUTOMATIC LIGHT CONTROL SENSOR

AUTOMATIC LIGHT CONTROL SENSOR > ADJUSTMENT

for Preparation Click here



1. ADJUST AUTOMATIC LIGHT CONTROL SENSOR


    B113715
  1. Pull the automatic light control sensor up. Turn the filter part of the sensor, without pressing the upper surface, to adjust the brightness of the automatic lights.
    Automatic light brightness
    Filter turning direction
    Brighten
    Clockwise
    Darken
    Counterclockwise

  1. Push the automatic light control sensor in.

    HINT:
    Degrease the filter.

    NOTICE:
    Do not press the filter part of the sensor too hard.