Home › ENGINE ยท 5L-E › STARTING › STARTER (for 2.7kW Type)

STARTER (for 2.7kW Type) > INSTALLATION

for Preparation Click here



1. INSTALL STARTER ASSEMBLY
  1. Install the starter with the 2 bolts, nut and stay.

    Torque:
    69 N*m{ 700 kgf*cm , 51 ft.*lbf }

  1. Install the starter stay with the 2 bolts and nut.

    Torque:
    Bolt:
    37 N*m{ 380 kgf*cm , 27 ft.*lbf }
    Nut:
    12.5 N*m{ 130 kgf*cm , 9 ft.*lbf }

  1. Connect the 30 terminal with the nut.

    Torque:
    21 N*m{ 215 kgf*cm , 16 ft.*lbf }

  1. Install the terminal cap.

  1. Connect the starter connector.