Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › FRONT BLOWER RESISTOR

FRONT BLOWER RESISTOR > INSPECTION

for Preparation Click here



1. INSPECT FRONT BLOWER RESISTOR


    E032877E03
  1. Remove the front blower resistor and disconnect the connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester connection
    Condition
    Specified condition
    1 - 4
    Always
    1.57 to 1.81 Ω
    3 - 4
    Always
    0.64 to 0.74 Ω
    2 - 4
    Always
    0.20 to 0.24 Ω

    If the resistance value is not as specified, replace the front blower resistor.