Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › REAR BLOWER RESISTOR (for Cooler)

REAR BLOWER RESISTOR (for Cooler) > INSPECTION

for Preparation Click here



1. INSPECT REAR BLOWER RESISTOR


    E032877E03
  1. Remove the rear blower resistor and disconnect the connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester connection
    Condition
    Specified condition
    1 - 4
    Always
    1.57 to 1.81 Ω
    1 - 2
    Always
    0.64 to 0.74 Ω
    1 - 3
    Always
    0.20 to 0.24 Ω

    If the resistance value is not as specified, replace the rear blower resistor.