Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › MAGNETIC CLUTCH RELAY

MAGNETIC CLUTCH RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT MAGNETIC CLUTCH RELAY


    E034090E04
  1. Remove the magnetic clutch relay from the instrument panel R/B.

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester connection
    Condition
    Specified condition
    1 - 4
    Always
    1.57 to 1.81 Ω
    3 - 4
    Always
    0.64 to 0.74 Ω
    2 - 4
    Always
    0.20 to 0.24 Ω

    If the resistance value is not as specified, replace the magnetic clutch relay.