Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › REAR BLOWER RESISTOR (for Heater)

REAR BLOWER RESISTOR (for Heater) > INSPECTION

for Preparation Click here



1. INSPECT REAR HEATER BLOWER RESISTOR


    E032877E04
  1. Remove the rear heater blower resister and disconnect the connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester connection
    Condition
    Specified condition
    1 - 4
    Always
    2.59 to 2.99 Ω
    1 - 2
    Always
    1.38 to 1.60 Ω
    1 - 3
    Always
    0.36 to 0.42 Ω

    If the resistance value is not as specified, replace the rear blower resistor.