Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › CENTER AIRBAG SENSOR ASSEMBLY

CENTER AIRBAG SENSOR ASSEMBLY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
  1. Perform a diagnostic system check. (Click here)



2. INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)
  1. Perform a diagnostic system check. (Click here)



3. INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG DEPLOYED)
  1. Replace the front airbag sensor.

    CAUTION:
    For removal and installation procedures of the front airbag sensor, be sure to follow the correct procedure.

    NOTICE:
    The front airbag sensor should be replaced after any of the airbags has deployed, as it has been subjected to the impact.