OIL PUMP > DISASSEMBLY |
| 1. REMOVE TIMING GEAR CASE OR TIMING CHAIN CASE OIL SEAL |
![]() |
Using a screwdriver , remove the oil seal.
| 2. REMOVE OIL PUMP RELIEF VALVE |
![]() |
Place the timing gear case on wooden blocks.
![]() |
Using a 12 mm hexagon wrench, remove the plug, gasket, spring and relief valve.
| 3. REMOVE OIL PUMP DRIVE GEAR |
Remove the 8 screws, timing gear case, and the drive and driven gears.