REAR ROOM LIGHT ASSEMBLY > INSPECTION |
| 1. INSPECT REAR ROOM LIGHT ASSEMBLY (W/ PERSONAL LIGHT ASSEMBLY) |
![]() |
Remove the rear room light assembly.
Apply battery voltage to the rear room light connector.
Check that the rear room light comes on.
| Measurement condition | Switch condition | Specified condition |
| Battery positive (+) → Terminal 3 Battery negative (-) → Terminal 2 | DOOR | Rear room light comes on |
| Battery positive (+) → Terminal 3 Battery negative (-) → Terminal 1 | ON | Rear room light comes on |
| 2. INSPECT REAR ROOM LIGHT ASSEMBLY (W/O PERSONAL LIGHT ASSEMBLY) |
![]() |
Remove the rear room light assembly.
Apply battery voltage to the rear room light connector.
Check that the rear room light comes on.
| Measurement condition | Switch condition | Specified condition |
| Battery positive (+) → Terminal 2 Battery negative (-) → Body ground | ON | Rear room light comes on |
| Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 | DOOR | Rear room light comes on |