Home › BODY ELECTRICAL › LIGHTING › REAR DOOR COURTESY SWITCH

REAR DOOR COURTESY SWITCH > INSPECTION

for Preparation Click here



1. INSPECT REAR DOOR COURTESY SWITCH


    B113726E01
  1. Remove the rear door courtesy switch.

  1. Measure the resistance according to the value(s) in the table below.

    Resistance:
    Tester connection
    Switch operation
    Specified condition
    1 - Switch body
    Switch ON
    (Shaft is not pressed)
    Below 1 Ω
    1 - Switch body
    Switch OFF
    (Shaft is pressed)
    10 kΩ or higher

    If the result is not as specified, replace the rear door courtesy switch.