Home › BODY ELECTRICAL › LIGHTING › BACK DOOR COURTESY SWITCH

BACK DOOR COURTESY SWITCH > INSPECTION

for Preparation Click here



1. INSPECT BACK DOOR COURTESY SWITCH


    B113727
  1. Remove the back door courtesy switch.

  1. Measure the resistance according to the value(s) in the table below.

    Resistance:
    Tester connection
    Switch operation
    Specified condition
    1 - 2
    Switch ON
    Below 1 Ω
    1 - 2
    Switch OFF
    10 kΩ or higher

    If the result is not as specified, replace the back door courtesy switch.