Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT RELAY

HEADLIGHT RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT HEADLIGHT RELAY


    B113728
  1. Remove the headlight relay.

  1. Measure the resistance according to the value(s) in the table below.

    Resistance:
    Tester connection
    Specified condition
    3 - 5
    10 kΩ or higher
    3 - 5
    Below 1 Ω
    (When battery voltage is applied to terminal 1 - 2)

    If the result is not as specified, replace the headlight relay.