Home › BODY ELECTRICAL › LIGHTING › FOG LIGHT RELAY

FOG LIGHT RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT FRONT FOG LIGHT RELAY


    B113729
  1. Remove the front fog light relay.

  1. Measure the resistance according to the value(s) in the table below.

    Resistance:
    Tester connection
    Specified condition
    3 - 5
    10 kΩ or higher
    3 - 5
    Below 1 Ω
    (When battery voltage is applied to terminal 1 - 2)

    If the result is not as specified, replace the front fog light relay.