Home › BODY ELECTRICAL › WIPER AND WASHER › FRONT WASHER MOTOR

FRONT WASHER MOTOR > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT FRONT WASHER MOTOR


    B113743
  1. Fill the washer tank with washer fluid.

    HINT:
    Operation should be performed with the front washer motor installed to the washer tank assembly.

  1. Apply battery voltage to the front washer motor connector.

  1. Check operation of the front washer motor.

    OK:
    Measurement condition
    Specified condition
    Battery positive (+) → Terminal 2
    Battery positive (-) → Terminal 1
    Washer fluid flows from washer tank

    If the result is not as specified, replace the front washer motor.

    NOTICE:
    Washer fluid will rush out when the motor operates. Take care so that the washer fluid does not get into your eyes.