Home
›
ENGINE · 5L-E
›
FUEL
›
FUEL SYSTEM
FUEL SYSTEM > INSPECTION
for Preparation
Click here
1. CHECK FUEL TEMPERATURE SENSOR
Resistance inspection.
Using an ohmmeter, measure the resistance between terminals.
Resistance:
2.21 to 2.69 kΩ at 20°C (68°F)
0.278 to 0.349 kΩ at 80°C (176°F)
NOTICE:
If checking the fuel temperature sensor in water, be careful not to allow water to enter the terminals, and after checking, clean the sensor.