HEADLIGHT ASSEMBLY > ON-VEHICLE INSPECTION |
| 1. INSPECT HEADLIGHT ASSEMBLY (HEADLIGHT BEAM LEVEL CONTROL ACTUATOR OPERATION) |
![]() |
Disconnect the headlight beam level control actuator connector.
Connect the battery's positive (+) lead to headlight leveling switch terminal 1 and negative (-) lead to headlight leveling switch terminal 2.
Connect the battery's positive (+) lead to each of the headlight beam level control actuator terminals (3) and the negative (-) lead to each of the headlight beam level control actuator terminals (1).
Connect headlight leveling switch terminal 4 and LH side headlight beam level control actuator terminal 2.
Connect headlight leveling switch terminal 5 and RH side headlight beam level control actuator terminal 2.
Inspect the headlight beam level control actuator operation when the headlight leveling switch is operated.