Home › TRANSMISSION ยท A343E AUTOMATIC TRANSMISSION › SUN GEAR AND ONE-WAY CLUTCH

SUN GEAR AND ONE-WAY CLUTCH > INSPECTION

for Preparation Click here



1. INSPECT 1 WAY CLUTCH ASSEMBLY


    AT08440E02
  1. Hold the planetary sun gear, and turn the 2nd brake hub. Check that the 2nd brake hub can be turned freely clockwise and locked counterclockwise.



2. INSPECT PLANETARY SUN GEAR SUB-ASSEMBLY


    AT08337
  1. Using a dial indicator, measure the inside diameter of the planetary sun gear bushings.

    Maximum inside diameter:
    27.08 mm (1.0661 in.)

    If the inside diameter is greater than the maximum, replace the planetary sun gear.