Home › TRANSMISSION ยท R351 MANUAL TRANSMISSION › INPUT SHAFT

INPUT SHAFT > DISASSEMBLY

for Preparation Click here



1. REMOVE SYNCHRONIZER RING NO.2


    D026113
  1. Remove the synchronizer ring No.2 from the input shaft.



2. REMOVE INPUT SHAFT BEARING


    D026114
  1. Remove the input shaft bearing from the input shaft.



3. REMOVE FRONT BEARING SHAFT SNAP RING


    D026115
  1. Using a snap ring expander, remove the front bearing shaft snap ring from the input shaft.



4. REMOVE INPUT SHAFT FRONT BEARING


    D026116E01
  1. Using SST and a press, remove the input shaft front bearing from the input shaft.

    SST
    09950-00020