Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › FRONT BLOWER MOTOR

FRONT BLOWER MOTOR > INSPECTION

for Preparation Click here



1. INSPECT FRONT BLOWER MOTOR


    E103727E01
  1. Connect the positive (+) lead from the battery to terminal 2 and negative (-) lead to terminal 1, then check that the motor operates smoothly.

    OK:
    The motor operates smoothly.

    If the operation is not as specified, replace the front blower motor sub-assembly.

  1. Measure the current according to the value(s) in the table below.

    Specified current:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Blower motor operate
    Below 1.8 A

    If the current value is not as specified, replace the front blower motor sub-assembly.