Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › PROPELLER SHAFT

PROPELLER SHAFT > SERVICE DATA



Super long wheelbase 
Propeller shaft assembly runout
Maximum : 0.3 mm (0.0118 in.)
Intermediate shaft runout
Maximum : 0.3 mm (0.0118 in.)

Long wheelbase 
Propeller shaft assembly runout : Shaft tube length 800 mm (0.0118in.) or more
Maximum : 0.3 mm (0.0118 in.)
Propeller shaft assembly runout : Shaft tube length less than 800 mm (0.0118in.)
Maximum : 0.3 mm (0.0118 in.)