Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › 2TR-FE ENGINE CONTROL SYSTEM

2TR-FE ENGINE CONTROL SYSTEM > SERVICE DATA



Engine coolant temperature sensor
Resistance
2.32 to 2.59 kΩ at 20°C (68°F)
0.310 to 0.326 kΩ at 80°C (176°F)
Camshaft timing oil control valve assembly
OCV off
OCV on
Specified condition
Normal engine speed
Rough idling or engine stalls
Camshaft timing oil control valve assembly
Resistance
6.9 to 7.9 kΩ at 20°C (68°F)
Intake air flow meter
Specified condition
1.0 to 270.0 g/s
Intake air flow meter
4 (THA) - 5 (E2)
4 (THA) - 5 (E2)
4 (THA) - 5 (E2)
Resistance
12.5 to 16.9 kΩ at -20°C (4°F)
2.19 to 2.67 kΩ at 20°C (68°F)
0.50 to 0.68 kΩ at 60°C (140°F)
Crankshaft position sensor
Resistance
1,850 to 2,450 Ω at 20°C (68°F)
Camshaft position sensor
Resistance
950 to 1,250 Ω at 20°C (68°F)
Integration relay (A/F relay)
1I-2 - 1I-3
1I-1 - 1I-4
1I-1 - 1I-4
Resistance
Approx 310Ω
10 kΩ or higher
Below 1Ω (When battery voltage is applied to terminals 1I-2 and 1I-3)
Integration relay (HORN relay)
1I-5 - 1I-7
Resistance
Approx 310Ω
Integration relay (HORN relay)
1I-5 - negative battery terminal (-)
1I-8 - negative battery terminal (-)
1I-8 - negative battery terminal (-)
Voltage
battery voltage
0V
battery voltage (When battery voltage is applied to terminals HAZ-HORN fuse 2 and 1I-7)
Integration relay (C/OPN relay)
1J-6 - 1J-7
1J-4 - 1J-8, 1J-5 - 1J-8
1J-4 - 1J-8, 1J-5 - 1J-8
Resistance
Approx 310Ω
10 kΩ or higher
Below 1Ω (When battery voltage is applied to terminals 1J-2 and 1J-3)
Integration relay (EFI MAIN relay)
1J-2 - 1J-3
1J-1 - 1J-4
1J-1 - 1J-4
Resistance
Approx 310Ω
10 kΩ or higher
Below 1Ω (When battery voltage is applied to terminals 1J-2 and 1J-3)
Throttle body
Standard throttle valve opening percentagr
Specified condition
60% or more
Knock control sensor
1 (Ground) - 2 (Output)
Resistance
120 to 280 kΩ at 20°C (68°F)
Accelerator pedal (Accelerator Position No.1)
Accelerator pedal is released
Accelerator pedal is depressed
Specified Condition
0.4 to 1.4 V
3.0 to 4.6 V
Accelerator pedal (Accelerator Position No.2)
Accelerator pedal is released
Accelerator pedal is depressed
Specified Condition
0.9 to 2.3 V
3.4 to 5.5 V