Home › ENGINE ยท 5L-E › COOLING › WATER PUMP

WATER PUMP > REMOVAL > Preparation



SST 
I000439
09213-54015
Crankshaft Pulley Holding Tool


I000583
(91651-60855)
Bolt


I000032
09330-00021
Companion Flange Holding Tool


I031012
09950-50013
Puller C Set


I002191
(09951-05010)
Hanger 150


I002192
(09952-05010)
Slide Arm


I002193
(09953-05010)
Center Bolt 100


I002194
(09953-05020)
Center Bolt 150


I002197
(09954-05030)
Claw No.3


I002061
09960-10010
Variable Pin Wrench Set


I002062
(09962-01000)
Variable Pin Wrench Arm Assy


I002063
(09963-01000)
Pin 10




COOLANT
Item
Capacity
Classification
Engine coolant
w/ rear heater: 17.2 liters (16.2 US qts, 15.1 lmp. qts)
Use only "TOYOTA Super Long Life Coolant", or similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology (coolant with long-life hybrid organic acid technology consists of a combination of low phosphates and organic acids)
w/o rear heater: 9.1 liters (8.6 US qts, 8 lmp. qts)


EQUIPMENT
Heater

Radiator cap tester

Slide calipers

thermometer

torque wrench



RECOMMENDED TOOLS
J002819
09082-00040
TOYOTA Electrical Tester

I002105
(09083-00150)
Test Lead Set