MANUAL SHIFTING TEST
Troubleshooting · Vehicles built from Dec 2017
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Nov 2017 from Dec 2017
| PERFORM MANUAL SHIFTING TEST |
- HINT:
- With this test, it can be determined whether the trouble occurs in the electrical circuit or is a mechanical problem in the transmission.
- If any abnormalities are found in the following test, the problem is in the transmission itself.
- With this test, it can be determined whether the trouble occurs in the electrical circuit or is a mechanical problem in the transmission.
Disconnect the connector of the transmission wire.

Inspect the manual driving operation.
Check that the shift and gear positions correspond to the table below.
While driving, shift through the L, 2, 3 and D positions. Check that the gear change corresponds to the shift position.Shift Position
Gear Position
D
O/D
3
O/D
2
3rd
L
1st
R
Reverse
P
Pawl Lock
- HINT:
- If the gear positions of the L, 2, 3 and D are difficult to distinguish, do the following road test (Click here).
- If any abnormality is found in the above test, the problem is in the transmission itself.
Connect the transmission wire connector.
Clear the DTC (Click here).