2014-2019 Hiace · Service Manual BRAKE

C1201 Engine Control System Malfunction

Diagnostic trouble codes · Vehicles built from Dec 2017

Versions by build date: Jan 2015 – Dec 2016 Jan 2017 – Nov 2017 from Dec 2017

DESCRIPTION

If a malfunction is detected in the engine control system, the ECM sends a malfunction signal to the skid control ECU (brake actuator assembly). The skid control ECU (brake actuator assembly) stores this DTC and prohibits the following controls:
  1. VSC
  2. TRC
DTC No.
DTC Detection Condition
Trouble Area
C1201
An engine control system malfunction signal continues for 1 second or more.
Engine control system

INSPECTION PROCEDURE


1. CHECK ENGINE TYPE
  1. Check the engine type.

    Result:
    Result
    Proceed to
    1KD-FTV
    A
    2KD-FTV
    B
    1TR-FE
    C
    2TR-FE
    D



B
Go to step 3

C
Go to step 4

D
Go to step 5
A


2. CHECK FOR DTC (ENGINE CONTROL SYSTEM)
  1. Check if any engine control system DTC is output (w/o DPF: Click here, w/ DPF: Click here).

    Result:
    Result
    Proceed to
    DTC is not output
    A
    DTC is output (w/o DPF)
    B
    DTC is output (w/ DPF)
    C



B
GO TO ENGINE CONTROL (DIAGNOSTIC TROUBLE CODE CHART) (Click here)

C
GO TO ENGINE CONTROL (DIAGNOSTIC TROUBLE CODE CHART) (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)

3. CHECK FOR DTC (ENGINE CONTROL SYSTEM)
  1. Check if any engine control system DTC is output (Click here).

    Result:
    Result
    Proceed to
    DTC is not output
    A
    DTC is output
    B



B
GO TO ENGINE CONTROL (DIAGNOSTIC TROUBLE CODE CHART) (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)

4. CHECK FOR DTC (ENGINE CONTROL SYSTEM)
  1. Check if any engine control system DTC is output (Click here).

    Result:
    Result
    Proceed to
    DTC is not output
    A
    DTC is output
    B



B
GO TO ENGINE CONTROL (DIAGNOSTIC TROUBLE CODE CHART) (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)

5. CHECK FOR DTC (ENGINE CONTROL SYSTEM)
  1. Check if any engine control system DTC is output (w/o Secondary Air Injection System: Click here, w/ Secondary Air Injection System: Click here, w/ Dual VVT-i: Click here).

    Result 
    Result
    Proceed to
    DTC is not output
    A
    DTC is output (w/o Secondary Air Injection System)
    B
    DTC is output (w/ Secondary Air Injection System)
    C
    DTC is output (w/ Dual VVT-i)
    D



B
GO TO ENGINE CONTROL (DIAGNOSTIC TROUBLE CODE CHART) (Click here)

C
GO TO ENGINE CONTROL (DIAGNOSTIC TROUBLE CODE CHART) (Click here)

D
GO TO ENGINE CONTROL (DIAGNOSTIC TROUBLE CODE CHART) (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)


← C1201 Engine Control System Malfunction (Jan 2017 – Nov 2017)C1203 ECM Communication Circuit Malfunction (Jan 2015 – Mar 2016) →