2014-2019 Hiace · Service Manual DRIVE LINE

INSTALLATION

Removal / installation · Vehicles built from Oct 2014


1. INSTALL PROPELLER SHAFT ASSEMBLY

  1. C102186E01
    Remove the SST from the extension housing.

  1. Install the propeller shaft assembly in the extension housing.

  1. Align the matchmarks on the propeller shaft flange and differential flange.

  1. C102185E01
    Install the propeller shaft assembly with the 4 nuts, 4 bolts and 4 washers.

    Torque:
    74 N*m{ 755 kgf*cm , 54 ft.*lbf }

← REASSEMBLY (Oct 2014 – Nov 2017)REASSEMBLY (from Dec 2017) →