INSTALLATION
Removal / installation · Vehicles built Oct 2014 – Mar 2016
Versions by build date: Oct 2014 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
| 1.
INSTALL CLUTCH ACCUMULATOR ASSEMBLY |
 |
- Install the clutch accumulator assembly with the 2 nuts.
-
Torque:
- 4.9 N*m{
50 kgf*cm
, 43 in.*lbf
}
Using a union nut wrench, connect the 2 clutch tubes.
-
Torque:
- 25 N*m{
255 kgf*cm
, 18 ft.*lbf
}
- NOTICE:
- Use the formula to calculate special torque value for situations where a union nut wrench is combined with a torque wrench (Click here).
| 2.
ADD BRAKE FLUID
|
 |
- Fluid:
- SAE J1703 or FMVSS No. 116 DOT3 or equivalent
| 3.
BLEED CLUTCH LINE |
 |
Fill the brake reservoir tank with brake fluid and bleed the clutch system.
-
Torque:
- 11 N*m{
110 kgf*cm
, 8 ft.*lbf
}
| 4.
CHECK FOR BRAKE FLUID LEAKAGE |
 |
- HINT:
- Check for leakage in the clutch system.
| 5.
INSPECT BRAKE FLUID LEVEL IN RESERVOIR
|
 |
Check the fluid level and add fluid if necessary.
- Fluid:
- SAE J1703 or FMVSS No.116 DOT3 or equivalent