2014-2019 Hiace · Service Manual TRANSMISSION

REASSEMBLY

Removal / installation · Vehicles built from Oct 2014

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. INSTALL SHIFT LOCK CONTROL ECU
  1. Attach the 3 claws to install the shift lock control ECU to the shift lock control unit assembly.

  1. Connect the shift lock solenoid connector to the shift lock control ECU.


2. INSTALL POSITION INDICATOR SLIDE COVER
  1. Install the No. 2 position indicator slide cover to the position indicator slide cover.

  1. Install the position indicator slide cover with the No. 2 position indicator slide cover to the lower position indicator housing.


3. INSTALL LOWER POSITION INDICATOR HOUSING

  1. C301619E01
    Attach the 2 claws to install the lower position indicator housing to the shift lock control unit assembly.
    Text in Illustration 
    *a
    Hook

    NOTICE:
    Insert the hook first.


4. INSTALL POSITION INDICATOR LIGHT BULB
  1. Install the position indicator light cap to the position indicator light bulb.

  1. Install the position indicator light bulb to the wire socket.

  1. C301620
    Attach the guide and Connect the wire socket to the lower position indicator housing.

    NOTICE:
    Rotate the wire until the lock is engaged.

← ADJUSTMENT (from Oct 2014)INSTALLATION (from Oct 2014) →