REMOVAL
Removal / installation · Vehicles built Oct 2014 – Mar 2016
Versions by build date: Oct 2014 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
| 1. PRECAUTION (w/ Airbag System) |
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Airbag System) |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 3. REMOVE INSTRUMENT PANEL ASSEMBLY |
| 4. REMOVE ANTENNA CORD SUB-ASSEMBLY |
for LHD:


Text in Illustration *A
for Glass Antenna Type
*B
for Pole Antenna Type
for Glass Antenna Type:
Detach the 3 clamps and remove the antenna cord sub-assembly.for Pole Antenna Type:
Detach the 4 clamps and remove the antenna cord sub-assembly.
for RHD:


Text in Illustration *A
for Glass Antenna Type
*B
for Pole Antenna Type
Detach the 4 clamps and remove the antenna cord sub-assembly.
