2014-2019 Hiace · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built Oct 2014 – Nov 2017

Versions by build date: Oct 2014 – Nov 2017 from Dec 2017


1. INSTALL OIL FILTER SUB-ASSEMBLY
  1. Apply clean engine oil to the gasket of a new oil filter.

    NOTICE:
    Check and clean the oil filter installation surface.

  1. Lightly screw the oil filter into place by hand. Tighten it until the gasket contacts the seat.

  1. A113040E01
    Using SST, tighten the oil filter until the gasket contacts the seat, and then turn it further 3/4.
    SST
    09228-07501  


2. INSTALL ENGINE SERVICE HOLE COVER NO.2
  1. Install the engine service hole cover No.2 with the 3 bolts.

    Torque:
    13 N*m{ 133 kgf*cm , 10 ft.*lbf }

  1. A113039
    Return the carpet.


3. ADD ENGINE OIL
  1. Add the engine oil.

    Standard capacity:
    Item
    Capacity
    Drain and refill with oil filter change
    6.5 liters (6.9 US qts, 5.7 Imp. qts)
    Drain and refill without oil filter change
    6.3 liters (6.7 US qts, 5.5 Imp. qts)
    Dry fill
    7.2 liters (7.6 US qts, 6.3 Imp. qts)

  1. Install the oil filler cap.


4. CHECK FOR ENGINE OIL LEAKS
  1. Start the engine and check that no leakage from the connection with the oil filter and drain plug gasket.

← REMOVAL (from Dec 2017)INSTALLATION (from Dec 2017) →