REMOVAL
Removal / installation · Vehicles built Oct 2014 – Nov 2017
Versions by build date: Oct 2014 – Nov 2017 from Dec 2017
| 1. DRAIN ENGINE OIL |
Remove the oil filler cap.
Remove the oil drain plug, and drain the engine oil from the oil pan.
Install a new gasket and the drain plug.
- Torque:
- 34 N*m{ 347 kgf*cm , 25 ft.*lbf }
| 2. REMOVE ENGINE SERVICE HOLE COVER NO.2 |
Roll up the carpet.

Remove the 3 bolts and the engine service hole cover No.2.
| 3. REMOVE OIL FILTER SUB-ASSEMBLY |
Using SST, remove the oil filter.

- SST
- 09228-07501
- HINT:
- Position the drain oil container to collect the oil from the oil filter.
