DISASSEMBLY
Removal / installation · Vehicles built Oct 2014 – Dec 2016
Versions by build date: Oct 2014 – Dec 2016 from Jan 2017
| 1.
REMOVE BACK DOOR INSIDE HANDLE ASSEMBLY
|
 |
- Remove the screw and the back door inside handle assembly.
| 2.
REMOVE BACK DOOR TRIM BOARD
|
 |
- Remove the 2 screws.
Using a clip remover, remove the 18 clips and the back door trim board.
| 3.
REMOVE BACK DOOR INSIDE HANDLE ASSEMBLY
|
 |
- Remove the screw and the back door inside handle assembly.
| 4.
REMOVE BACK DOOR REMOTE CONTROL ASSEMBLY |
 |
Disconnect the wire and link.
Detach the 2 clamps.
Remove the 3 screws and the back door remote control assembly.


| 5.
REMOVE BACK DOOR CLOSER COVER
|
 |
- Detach the 3 clips and 3 claws and remove the back closer cover.
| 6.
REMOVE PIN HOLD CLIP |
 |
- Remove the pin hold clip.
| 7.
REMOVE BACK DOOR LOCK ASSEMBLY |
 |
- Remove the 4 bolts and the back door lock assembly.
| 8.
REMOVE BACK DOOR CLOSER MOTOR ASSEMBLY |
 |
- Disconnect the connector and detach the clamp.
Remove the 3 bolts and back door closer motor assembly.
| 9.
REMOVE DOOR CONTROL MOTOR |
 |
- Using a T25 "TORX" driver, remove the 3 "TORX" screws and door control motor.