2014-2019 Hiace · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built Apr 2016 – Dec 2016

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017


1. INSTALL FUEL FILTER ELEMENT SUB-ASSEMBLY

  1. A102693E01
    Attach 2 new O-rings to a new fuel filter element sub-assembly and a new O-ring to the fuel filter case sub-assembly.

  1. Install the fuel filter element sub-assembly to the fuel filter case sub-assembly.

  1. A102984E01
    Align the matchmark on the fuel filter cap assembly with the 2 matchmarks on the fuel filter case sub-assembly

  1. A102985E01
    Turn the fastener nut until a 'click' sound is heard.

    HINT:
    Just before the marks of the case and nut align, the turning difficulty of the fastener nut will increase. Use a screwdriver as a lever to turn the fastener nut.

  1. Install the fuel filter assembly.

  1. Install the 2 fuel hoses.

  1. Install the 2 fuel heater hoses.


2. INSTALL FUEL TANK CAP ASSEMBLY

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

4. RESET FUEL FILTER AND FILTER WARNING LAMP
  1. Turn the ignition switch on.

  1. A103400E01
    After turning the ignition switch on, connect the clogging sensor connector within 3 to 60 seconds.

  1. Check that the combination meter's filter warning light turns off.


5. BLEED AIR FROM FUEL SYSTEM

  1. A114068E01
    Using the hand pump, bleed air from the fuel system until pumping becomes difficult.


6. PERFORM INITIALIZATION
(Click here)

7. CHECK FOR FUEL LEAKS
  1. Check that there are no fuel leaks anywhere on the fuel system after doing maintenance.

    HINT:
    When checking for fuel leaks, make sure that there is pressure in the fuel line.

← INSTALLATION (Jan 2015 – Mar 2016)INSTALLATION (from Jan 2017) →