REASSEMBLY
Removal / installation · Vehicles built Jan 2015 – Dec 2016
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Dec 2016 from Jan 2017
- NOTICE:
- Do not try to remove the nylon tube as it is welded to the fuel suction with pump and gauge tube assembly (Click here).
| 1. INSTALL FUEL PUMP |
Install the fuel pump spacer to the fuel pump.
Apply gasoline to a new O-ring and install the O-ring to the fuel pump.
Connect the fuel pump harness connector to the fuel pump.
Attach the 5 claws to the claw holes to install the fuel pump to the fuel filter assembly.
| 2. INSTALL NO. 1 FUEL SUB-TANK |
Attach the 5 claws to the claw holes to install the No. 1 fuel sub-tank.
- NOTICE:
- Do not damage the No. 1 fuel sub-tank.
Attach the claw and 2 clamps to the No. 1 fuel sub-tank.
Connect the jet pump to the No. 1 fuel sub-tank.
| 3. INSTALL FUEL SENDER GAUGE ASSEMBLY |
Set the fuel sender gauge assembly on the No. 1 fuel sub-tank. Then slide the fuel sender gauge assembly downward to install it.

Text in Illustration 

Slide
Connect the fuel sender gauge connector and fuel pump harness connector.
