2014-2019 Hiace · Service Manual ENGINE

REASSEMBLY

Removal / installation · Vehicles built from Jan 2015

Versions by build date: Oct 2014 – Dec 2014 from Jan 2015

NOTICE:
Do not try to remove the nylon tube as it is welded to the fuel suction with pump and gauge tube assembly (Click here).


1. INSTALL FUEL PUMP
  1. w/ Dual VVT-i:

    1. Install the fuel pump spacer to the fuel pump.

  1. Apply gasoline to a new O-ring and install the O-ring to the fuel pump.

  1. Connect the fuel pump harness connector to the fuel pump.

  1. Attach the 5 claws to the claw holes to install the fuel pump to the fuel filter assembly.


2. INSTALL NO. 1 FUEL SUB-TANK
  1. Attach the 5 claws to the claw holes to install the No. 1 fuel sub-tank.

    NOTICE:
    Do not damage the No. 1 fuel sub-tank.

  1. Attach the claw and 2 clamps to the No. 1 fuel sub-tank.

  1. Connect the jet pump to the No. 1 fuel sub-tank.


3. INSTALL FUEL SENDER GAUGE ASSEMBLY

  1. A309369
    Set the fuel sender gauge assembly on the No. 1 fuel sub-tank. Then slide the fuel sender gauge assembly downward to install it.
    Text in Illustration 
    V100135
    Slide

  1. Connect the fuel sender gauge connector and fuel pump harness connector.

← REASSEMBLY (Oct 2014 – Dec 2014)INSTALLATION (from Oct 2014) →