REMOVAL
Removal / installation · Vehicles built from Oct 2014
| 1. REMOVE AIR FUEL RATIO SENSOR |
Disconnect the air fuel ratio sensor connector.
Using SST, remove the air fuel ratio sensor from the front exhaust pipe assembly.

- SST
- 09224-00010
| 2. REMOVE OXYGEN SENSOR |
Disconnect the heated oxygen sensor connector.
Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

- SST
- 09224-00010
| 3. REMOVE FRONT EXHAUST PIPE ASSEMBLY |
Remove the 4 bolts and 4 compression springs from the front exhaust pipe assembly.
Disconnect the No. 4 exhaust pipe support to remove the front exhaust pipe assembly.
Remove the 2 gaskets from the exhaust manifold and front exhaust pipe assembly.
| 4. REMOVE EXHAUST TAIL PIPE ASSEMBLY |
Disconnect the 4 No. 4 exhaust pipe supports to remove the exhaust tail pipe assembly.
