2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Removal / installation · Vehicles built from Oct 2014


1. INSPECT THERMOSTAT

HINT:
A088651
The valve opening temperature is provided on the thermostat.

  1. Immerse the thermostat in water and gradually heat the water.

  1. Check the valve opening temperature of the thermostat.

    Valve opening temperature:
    80 to 84 °C (176 to 183 °F)

    If the valve opening temperature is not as specified, replace the thermostat.

  1. A103360
    Check the valve lift.

    Valve lift:
    10 mm (0.394 in.) or more at 95 °C (203 °F)

    If the valve lift is not as specified, replace the thermostat.

  1. Check that the valve is fully closed when the thermostat is at a low temperature (below 40 °C (104 °F)).
    If it is not fully closed, replace the thermostat.

← INSTALLATION (from Jan 2017)COMPONENTS (from Oct 2014) →