INSTALLATION
Removal / installation · Vehicles built Jan 2015 – Mar 2016
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
| 1.
INSTALL STARTER ASSEMBLY |
 |
- for Automatic Transmission:
Install the starter with the bolt and 2 nuts.
-
Torque:
- 68 N*m{
693 kgf*cm
, 50 ft.*lbf
}
- for Manual Transmission:
Install the starter with the bolt and nut.
-
Torque:
- 68 N*m{
693 kgf*cm
, 50 ft.*lbf
}
- Connect the wire harness to terminal 30 with the nut.
-
Torque:
- 21 N*m{
214 kgf*cm
, 15 ft.*lbf
}
Close the terminal cap.
Connect the terminal 50 connector to the starter.
- for Wide Body:
Install the wire ground cable with the bolt.
-
Torque:
- 25 N*m{
250 kgf*cm
, 18 ft.*lbf
}
| 2.
INSTALL NO. 1 TRANSMISSION CONTROL CABLE BRACKET
|
 |
- Install the No. 1 transmission control cable bracket onto the automatic transmission housing with the 2 bolts.
-
Torque:
- 28 N*m{
286 kgf*cm
, 21 ft.*lbf
}
| 3.
INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY
|
 |
- Secure the transmission control cable assembly to the No. 1 transmission control cable bracket with a new clip.
Install the transmission control cable assembly onto the control shaft lever with the nut.
-
Torque:
- 15 N*m{
150 kgf*cm
, 11 ft.*lbf
}
| 4.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
-
Torque:
- 5.4 N*m{
55 kgf*cm
, 48 in.*lbf
}
| 5.
PERFORM INITIALIZATION |
 |
Some system need initialization when reconnecting the battery cable. (Click here)