INSPECTION
Inspection · Vehicles built from Jan 2015
Versions by build date: Oct 2014 – Dec 2014 from Jan 2015
| INSPECT AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1) |
 |
- Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
1 (HA1A) - 2 (+B)
|
20°C (68°F)
|
1.6 to 3.2 Ω
|
1 (HA1A) - 4 (A1A-)
|
Always
|
10 kΩ or higher
|
Text in Illustration
*a
|
Component without harness connected (Air Fuel Ratio Sensor)
|
If the result is not as specified, replace the air fuel ratio sensor.