REMOVAL
Removal / installation · Vehicles built from Oct 2014
| 1. REMOVE ENGINE UNDER COVER NO.2 (w/ Engine Under Cover No.2) |
Remove the engine under cover No.2 together with the engine side under cover LH and engine side under cover RH (for Wide Body).
| 2. REMOVE OXYGEN SENSOR |
Remove oxygen sensor (w/ secondary air injection system).
Disconnect the oxygen sensor connector.
Using SST, remove the oxygen sensor from the exhaust pipe assembly front.

- SST
- 09224-00010
Remove oxygen sensor (w/o secondary air injection system)
Disconnect the oxygen sensor connector.
Using SST, remove the oxygen sensor from the exhaust pipe assembly front.

- SST
- 09224-00010
