2014-2019 Hiace · Service Manual ENGINE

DISASSEMBLY

Removal / installation · Vehicles built from Oct 2014


1. REMOVE STARTER YOKE ASSEMBLY

  1. A115884E01
    Remove the nut, then disconnect the lead wire from terminal C.

  1. Remove the 2 through bolts, then pull starter yoke and starter armature.

  1. Cold area:

    1. Remove the felt washer from the starter armature.


2. REMOVE MAGNET STARTER SWITCH ASSEMBLY

  1. A102626
    Remove the 3 screws, then remove the magnet starter switch.

  1. A102947E01
    Remove the starter clutch from the starter drive housing.

  1. Remove the magnet switch return spring from the starter clutch.

  1. Remove the starter idle pinion from the starter drive housing.

  1. Remove the retainer from the starter drive housing.

  1. Remove the clutch roller from the starter drive housing.

  1. A102627E01
    Using a magnetic finger, remove the steel ball from the starter clutch.


3. REMOVE STARTER BRUSH HOLDER ASSEMBLY

  1. A102628
    Remove the 2 screws, then remove the commutator end frame from the starter yoke.

  1. A102629
    Using a screwdriver, hold the spring back and disconnect the 4 brushes from the brush holder.

  1. Remove the brush holder from the starter armature.


4. REMOVE STARTER ARMATURE ASSEMBLY
  1. Remove the starter armature from the starter yoke.

← REMOVAL (from Oct 2014)INSPECTION (from Oct 2014) →