2014-2019 Hiace · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Oct 2014


1. INSTALL FUEL COOLER

  1. A103534E01
    Install the fuel cooler with the 3 bolts.

    Torque:
    18 N*m{ 180 kgf*cm , 13 ft.*lbf }

  1. A102486E01
    Install the 2 fuel hoses to the fuel cooler.


2. CHECK FOR FUEL LEAKS
  1. PERFORM ACTIVE TEST

    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch on.

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / Engine and ECT / Active Test.

    5. Perform the Active Test.

      Tester Display
      Test Details
      Control Range
      Diagnostic Notes
      Test the Fuel Leak
      Pressurizes common rail internal fuel pressure, and checks for fuel leaks
      Stop/Start
      1. Fuel pressure inside common rail pressurized to specified value and engine speed increased to 2,000 rpm when ON is selected
      2. Above conditions preserved while test is ON

← REMOVAL (from Oct 2014)COMPONENTS (from Oct 2014) →