Fail-safe Control List
Malfunction Part
|
Function
|
Transmission revolution sensor (NT)
|
During a transmission revolution sensor (NT) malfunction, shift control is performed based on the transmission revolution sensor (SP2) signal.
|
Transmission revolution sensor (SP2)
|
During a transmission revolution sensor (SP2) malfunction, shift control is performed based on the wheel speed sensor signal.
|
ATF temperature sensors (No. 1 and No. 2)
|
During an ATF temperature sensor malfunction, up-shifting to 5th and 6th is prohibited.
|
Shift solenoid valve SL1, SL2, SL3 and SL4
|
Stop the conduction of electric power to a failed solenoid and shift gears by turning on/off normal solenoids. If all solenoids are malfunctioning, gears will be selected through mechanical hydraulic circuits.
|
Shift solenoid valve SLT
|
During a shift solenoid valve SLT malfunction, the current to the shift solenoid valve is stopped. However, shifting is performed through normal clutch pressure control.
|
Shift solenoid valve SLU
|
During a shift solenoid valve SLU malfunction, the current to the shift solenoid valve is stopped. This stops lock-up control, thus decreasing fuel economy.
|
Fail-safe Control Chart
Gear Position under Normal Conditions
|
1st
|
2nd
|
3rd
|
4th
|
5th
|
6th
|
Shift solenoid valve SL1
|
ON Malfunction (without Fail-safe Control)*
|
1st
|
2nd
|
3rd
|
4th
|
4th
|
4th
|
OFF Malfunction (without Fail-safe Control)
|
1st to N
|
2nd to N
|
3rd to N
|
4th to N
|
5th
|
6th
|
Fail-safe Control during OFF Malfunction
|
Fixed in 3rd or 5th
|
Shift solenoid valve SL2
|
ON Malfunction (without Fail-safe Control)*
|
1st to 4th
|
2nd to 4th
|
3rd to 4th
|
4th
|
5th
|
6th
|
OFF Malfunction (without Fail-safe Control)
|
1st
|
2nd
|
3rd
|
4th to 1st
|
5th to N
|
6th to N
|
Fail-safe Control during OFF Malfunction
|
Fixed in 2nd or 3rd
|
Shift solenoid valve SL3
|
ON Malfunction (without Fail-safe Control)*
|
1st to 2nd
|
2nd
|
3rd
|
4th
|
5th
|
6th
|
OFF Malfunction (without Fail-safe Control)
|
1st
|
2nd to 1st
|
3rd
|
4th
|
5th
|
6th to N
|
Fail-safe Control during OFF Malfunction
|
Fixed in 3rd
|
Shift solenoid valve SL4
|
ON Malfunction (without Fail-safe Control)*
|
3rd
|
3rd
|
3rd
|
4th
|
5th
|
5th
|
OFF Malfunction (without Fail-safe Control)
|
1st
|
2nd
|
3rd to 1st
|
4th
|
5th to N
|
6th
|
Fail-safe Control during OFF Malfunction
|
Fixed in 2nd
|