2014-2019 Hiace · Service Manual ENGINE

CHECK FOR INTERMITTENT PROBLEMS

Troubleshooting · Vehicles built Oct 2014 – Dec 2014

HINT:
Inspect the vehicle's ECM using check mode. Intermittent problems are easier to detect with the intelligent tester when the ECM is in check mode. In check mode, the ECM uses 1 trip detection logic, which is more sensitive to malfunctions than normal mode (default), which uses 2 trip detection logic.
  1. Clear the DTCs (Click here).
  2. Switch the ECM from normal mode to check mode using the tester (Click here).
  3. Perform a simulation test.
  4. Check and wiggle the harness(es), connector(s) and terminal(s).

← HOW TO PROCEED WITH TROUBLESHOOTING (Oct 2014 – Dec 2014)BASIC INSPECTION (Oct 2014 – Dec 2014) →