PRECAUTION
Precautions · Vehicles built Dec 2015 – Mar 2016
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Nov 2015 Dec 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
| 1.IGNITION SWITCH EXPRESSIONS |
The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.
Expression
Ignition Switch (Position)
Engine Switch (Condition)
Ignition switch off
LOCK
off
Ignition switch ACC
ACC
On (ACC)
Ignition switch ON
ON
On (IG)
Engine start
START
Start
| 2.INITIALIZATION AND REGISTRATION |
- NOTICE:
- When replacing the ECM and/or any other components in the following chart, perform the corresponding utility items.
- HINT:
- When the ECM and one or more other components are replaced at the same time, perform the following utility items by following the instructions shown on the GTS display, starting with the ECM.
Replacement Part
Utility Item
ECM
- Learning Values Save (Click here)
- Learning Values Write (Click here)
Engine assembly
- Clear Crank Time Compensation Data (Click here)
- Input Injector Compensation Code (Click here)
- Pilot Quantity Learning (Click here)
Crankshaft position sensor plate
Clear Crank Time Compensation Data (Click here)
Fuel supply pump assembly
Supply Pump Initialization (Click here)
Injector assembly
- Input Injector Compensation Code (Click here)
- Pilot Quantity Learning (Click here)
- Learning Values Save (Click here)
- HINT:
- When the ECM must be replaced, before replacing the ECM, perform the "Learning Values Save" function using the GTS. Then after installing the new ECM, perform all of the initializations/registrations for the "Learning Values Write" function by following the instructions shown on the GTS display.
| 3.INJECTOR COMPENSATION CODE |
- HINT:
- Each injector assembly has different fuel injection characteristics. In order to optimize fuel injection performance, the ECM compensates for these differences by adjusting the fuel injection duration of each injector assembly according to its compensation code. Injector compensation codes are unique, 30-digit, alphanumeric values printed on the head portion of each injector assembly.
- If an incorrect injector compensation code is input into the ECM, the engine may rattle or engine idling may become rough. In addition, engine failure may occur and the life of the engine may be shortened.
- Each injector assembly has different fuel injection characteristics. In order to optimize fuel injection performance, the ECM compensates for these differences by adjusting the fuel injection duration of each injector assembly according to its compensation code. Injector compensation codes are unique, 30-digit, alphanumeric values printed on the head portion of each injector assembly.
When an injector assembly is replaced, the injector compensation code must be input into the ECM (Click here).

When the ECM is replaced, all of the existing injector compensation codes must be input into the new ECM (Click here).
| 4.PILOT QUANTITY LEARNING |
- HINT:
- By performing "Pilot Quantity Learning", the injection volume for each cylinder is precisely adjusted so that the engine runs smoothly. The "Pilot Quantity Learning" information is stored in the EEPROM of the ECM.
- If an incorrect pilot quantity learning value is input into the ECM, the engine may rattle or engine idling may become rough.
- By performing "Pilot Quantity Learning", the injection volume for each cylinder is precisely adjusted so that the engine runs smoothly. The "Pilot Quantity Learning" information is stored in the EEPROM of the ECM.
When an injector assembly is replaced, the injector compensation code must be input to the ECM, and then pilot quantity learning must be performed (Click here).
When the ECM is replaced, all of the existing injector pilot quantity learning values must be input into the new ECM (Click here).
| 5.ENGINE DIFFICULT TO START, ENGINE STALLING, BLACK SMOKE EMITTED, ROUGH IDLING, EXCESSIVE ENGINE VIBRATION, ENGINE KNOCKING, LACK OF POWER OR HESITATION |
Check if the customer problem is described below. If so, refer to the appropriate troubleshooting section.
Engine is difficult to start or stalling.
Black smoke is emitted.
There is rough idling or excessive engine vibrations.
There is engine knocking or rattling.
There is a lack of power or hesitation.
| 6.WHEN USING GTS |
- CAUTION:
- Observe the following items for safety reasons:
- Read the GTS's instruction books before using the GTS.
- Make sure that the GTS cable is not caught on the pedals, shift lever or steering wheel when driving with the GTS connected to the vehicle.
- When driving the vehicle for testing purposes using the GTS, two persons are required. One drives the vehicle and the other operates the GTS.
- Observe the following items for safety reasons: