2014-2019 Hiace · Service Manual ENGINE

PRECAUTION

Precautions · Vehicles built Apr 2016 – Dec 2016

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017


1.INITIALIZATION AND REGISTRATION

NOTICE:
When replacing the ECM and/or any other components in the following chart, perform the corresponding utility items.


HINT:
When the ECM and other component(s) are replaced at the same time, perform the following utility items by following the instructions shown on the GTS display, starting with the ECM.
Replacement Part
Utility Item
ECM
  1. Learning Values Save (Click here)
  2. Learning Values Write (Click here)
Engine assembly
Input Injector Compensation Code (Click here)
Supply pump
Supply Pump Initialization (Click here)
Injector
Input Injector Compensation Code (Click here)


2.INJECTOR COMPENSATION CODE

HINT:
  1. Each injector has different fuel injection characteristics. In order to optimize fuel injection performance, the ECM compensates for these differences by adjusting the fuel injection duration of each injector according to its compensation code. Injector compensation codes are unique, 30-digit, alphanumeric values printed on the head portion of each injector.
  2. If an incorrect injector compensation code is input into the ECM, the engine may rattle or engine idling may become rough. In addition, engine failure may occur and the life of the engine may be shortened.

  1. A141119E05
    When an injector is replaced, the injector compensation code must be input into the ECM (Click here).
    Text in Illustration 
    *a
    Example
    *b
    Injector Compensation Code

  2. When the ECM is replaced, all of the existing injector compensation codes must be input into the new ECM (Click here).

← PRECAUTION (Jan 2015 – Mar 2016)PRECAUTION (from Jan 2017) →