2014-2019 Hiace · Service Manual RESTRAINTS

INSTALLATION

Removal / installation · Vehicles built Jan 2015 – Mar 2016

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017


1. INSTALL INSTRUMENT PANEL WIRE NO.3

  1. C102034
    Connect the connector to the front passenger airbag assembly.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.


2. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY
  1. Engage the clamps and claws, and install the front passenger airbag assembly.

  1. C106066
    Install the instrument panel passenger airbag with the 2 bolts.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }

  1. C106065E02
    Connect the airbag connector.

  1. Install the airbag connector to the reinforcement.


3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

4. CONNECT CABLE TO BATTERY NEGATIVE TERMINAL

5. INSPECT FRONT PASSENGER AIRBAG ASSEMBLY

  1. C113663
    With the front passenger airbag installed on the vehicle, perform a visual check. If there are any defects mentioned below, replace the instrument panel with a new one:
    1. Cuts, minute cracks or marked discoloration on the instrument panel around the front passenger airbag.


6. INSPECT SUPPLEMENTAL RESTRAINT SYSTEM WARNING LIGHT
(Click here)

7. PERFORM INITIALIZATION
Some system need initialization when reconnecting battery cable. (Click here)
← INSTALLATION (Oct 2014 – Dec 2014)INSTALLATION (Apr 2016 – Dec 2016) →